Supply Multi-effect falling film evaporator
Product introduction:
Multi-effect falling film evaporators are a type of evaporator that offers several advantages over other types of evaporators. These advantages include higher efficiency, lower energy consumption, and reduced operating costs.
One of the main advantages of multi-effect falling film evaporators is their high efficiency. This is due to the fact that they use multiple effects to evaporate the liquid, which means that the heat from the steam produced in one effect is used to evaporate the liquid in the next effect. This results in a much higher overall efficiency compared to other types of evaporators.
Another advantage of multi-effect falling film evaporators is their lower energy consumption. Because they use multiple effects to evaporate the liquid, they require less energy to operate compared to other types of evaporators. This not only reduces energy costs but also helps to reduce the environmental impact of the process.
In addition to their high efficiency and low energy consumption, multi-effect falling film evaporators also offer reduced operating costs. This is because they require less maintenance and have fewer moving parts compared to other types of evaporators. This results in lower maintenance costs and reduced downtime, which can help to increase productivity and profitability.
Multi-effect falling film evaporators are also well-suited for a wide range of applications. They can be used to concentrate a variety of liquids, including juices, dairy products, and chemicals. They are also ideal for applications where a high degree of purity is required, such as in the production of pharmaceuticals and other high-value products.
Overall, multi-effect falling film evaporators offer several advantages over other types of evaporators. Their high efficiency, low energy consumption, reduced operating costs, and versatility make them an ideal choice for a wide range of applications. If you are in need of an evaporator for your process, consider a multi-effect falling film evaporator for optimal performance and cost savings.
Main technical parameters:
Model | Single Effect | Second Effect | Three Effects | Four Effects | Five Effects | Six Effects |
Water Evaporation(t/h) | 3 | 5 | 50 | 150 | 200 | 300 |
Feed Concentration(%) | According To Different Material Characteristics |
Discharge Concentration(%) | According To Different Material Characteristics |
Steam Pressure(MPa) | 0.05-0.1 |
Steam Consumption(t/h) | 1-1.5 | 0.4-0.6 | 0.3-0.4 | 0.25-0.3 | 0.25 | 0.22 |
Evaporation Temperature(℃) | According To Different Material Characteristics |
Scope of application:
The Multi Effect Evaporator is suitable for the production of materials with 50 ~ 200 ℃ and continuous feeding and discharging. It has the advantages of large concentration ratio, wide viscosity range, good heat transfer effect and large treatment capacity. It is suitable for the evaporation of materials with strong heat sensitivity, high concentration, high viscosity and corrosivity. It is widely used in juice, glucose, starch, pharmaceutical and chemical industry, pesticide, bioengineering Chemical wastewater treatment and other waste liquid recovery industry, especially suitable for non scaling, volatile or heat sensitive materials.
Products show: